DKK
Du har ingen varer i kurven

Mangler du gaven der rammer lige i hjertet?

Se vores store udvalg af Willow Tree Figurer

Walimex pro Audioadapter 107 XLR Adapter with Amplifier

Walimex pro Audioadapter 107 XLR Adapter with Amplifier

DKK 1.787,50
Inkl. Gratis Levering
På fjernlager! på fjernlager!
Forventet lev. 4-6 hverdage Denne vare er på lager ved vores leverandør, forbehold for mellemsalg ift sidste lager tjek d. 23-03-2023
Beskrivelse

Udvalgte Detaljer

ProducentWalimex
Modelnummer21031
Varenummer132995
EAN4056929210316

Teknisk Info for Walimex pro Audioadapter 107 XLR Adapter with Amplifier

Lyd, indgående kanaler2.0
MonteringstypeForbindelsesgevind
Tilslutningsgevind1/4"
VolumenkontrolDreje
Farve på produktSort
TypeAktiv
ProdukttypeLydadapter
Frekvensområde20 - 20000 Hz
XLR-indgange2
3,5 mm udJa

Mål og Vægt

Bredde155 mm
Dybde98 mm
Højde64 mm
Vægt599 g

walimex Audioadapter 107

  • 2 channel XLR adapter with pre-amplifier and phantom power
  • ideal of all DSLRs with an integrated microphone socket
  • The audio adapter is attached to the camera via a 1/4 inch thread

The walimex pro audio adapter is a 2 channel XLR adapter with pre-amplifier and phantom power. Ideal of all DSLR cameras with an integrated microphone socket A display shows optical monitoring of the sound recording. There is also a wide range of settings to optimise the sound quality. The audio adapter can be attached simply from below via a 1/4 inch thread to the camera.

Functions:

  • LCD Display: Level status display in dB
  • GAIN switch: Signal amplifier, low to high +20dB
  • PEAK switch: On/off switch of the LED signal displays. LEDs flash red in the event of overload
  • Monitor PLAY/REC switch: Play for headset - playback of camera audio signals. REC for headset - recording of audio signals during recording
  • AGC on/off switch: when activated (on), the output level of the camera is kept constant. Note: Function only possible with AGC cameras. Read the manual for your camera to learn more about this.
  • M/S switch: to select mono (M) or stereo (S) output mode
  • POWER switch: On/off switch
  • PHANTOM 12 V/48 V switch. For 12 or 48V condenser microphones. Note: Most microphones use 12 V. Read the manual for your microphone to learn more about this.
  • LINE/MIC/PH switch
  • LINE mode is for amplifiers and other audio devices with a line output. The signal is reduced to approx. 40dB
  • MIC mode is for self-powered microphones
  • PH (phantom) mode is for microphones with a pH value that require a phantom setting.

Technical specification:

  • Input 2 x XLR input, symmetrical 
    1 x 3.5 mm jack input
  • Output 1 x 3.5 mm audio output
    1 x headset output
  • Input signal MIC: 0 dB at -44 dBu Input
    LINE: 0 dB at +10 dBu Input
  • Output signal Normal mic levels
  • Frequency range 20 Hz - 20 kHz (+/-0.5 dB)
  • THD less than 0.01 % at 1 kHz, -30 dBu Input
  • S/N 85 dB at 1 kHz, -30 dBu Input
  • GAIN LO gain: 0 dB
    Hi gain: 20 dB
  • Phantom power 12 or 48 V / 14 mA
  • Level Meter -18 dB to +3 dB in 3dB steps
  • Battery 1 x 9 V block battery (3 hours without phantom power)
  • Weight 599 g
  • Size (L x W x H) 155 x 98 x 64 mm

 

Teknik

Frequency Range (Hz)20 - 20000

Tilslutning

audio-indgang1x
audio-udgang2x
XLR-In2x

Energi

Energy Supplybatterier
Type of Battery / Rechargeable Battery9 Volt Battery
Required Number1

Generelt

farvesort/ rød
bredde (mm)155
højde (mm)64
dybde (mm)98
vægt (g)599

Spørgsmål vedr. Walimex pro Audioadapter 107 XLR Adapter with Amplifier?

Skriv til os på kundeservice@skiftselv.dk

Relaterede Produkter
Bemærk! Der er først indgået en bindende aftale, når vi har bekræftet din bestilling.