DKK
Du har ingen varer i kurven
Januarudsalget er startet!
Spar op til -90% - så længe lager haves!
DIGITUS 2,5  SATA Hard Drive Adapter M.2/mSATA

DIGITUS 2,5 SATA Hard Drive Adapter M.2/mSATA

DKK 139
På fjernlager! på fjernlager!
Forventet lev. 4-6 hverdage Denne vare er på lager ved vores leverandør, forbehold for mellemsalg ift sidste lager tjek d. 31-01-2023
Beskrivelse

Udvalgte Detaljer

ProducentDIGITUS
ModelnummerDA-71118
Varenummer493264
EAN4016032457688

Beskrivelse af DIGITUS 2,5 SATA Hard Drive Adapter M.2/mSATA

Use an M.2 or mSATA SSD as a 2.5" hard disk for your PC or notebook

Suitable for M.2 SSD (2230, 2242, 2260, 2280) with B-Key or B+M-Key

Suitable for mSATA SSD (full size)

Allows booting from the built-in SSD

With the DIGITUS® 2.5" SATA HDD Enclosure, you can increase system speed and performance cost-effectively by installing an M.2 or mSATA SSD in your PC or notebook. The hard disk adapter is used like a standard 2.5" hard disk with SATA III connection. Due to the low installation height of only 7 mm, it can be installed in all common notebooks. M.2 (NGFF) SSDs of the following type are supported: M.2 Types 2230, 2242, 2260, 2280 with B-Key and B+M-Key. M.2 PCIe NVMe SSDs with M-Key are not supported. Furthermore mSATA SSDs with Mini PCIe 52 PIN are supported as full size version. The built-in SSD is selected via DIP switch on the board. Boot processes are supported by the adapter for all standard operating systems such as Windows, Mac OS or Linux. The internal SSD memory is protected from dust and damage by the completely closed aluminum housing. The SATA III interface offers a data transmission speed of 6 Gbit/s, the reading speed can be up to 520 MB/s, depending on the SSD used. The adapter supports SATA Rev.3.2 with DEVSLP power saving mode.

• 2.5" SATA HDD Enclosure with 7 mm height• Suitable for M.2 SSD (2230, 2242, 2260, 2280) with B-Key or B+M-Key• Suitable for mSATA SSD (full size)• Allows booting from the built-in SSD• SATA III interface with 6 Gbit/s• Reading speed up to 520 MB/s• SATA Rev.3.2 with DEVSLP energy saving mode• Mode Setting via DIP Switch• Completely closed aluminium housing

Teknisk Info for DIGITUS 2,5 SATA Hard Drive Adapter M.2/mSATA

Antal understøttede lagerdiske1
Størrelse på lagerdisk2.5"
Understøttede lagerdrev brugerfladerM.2,mSATA
Installeret lagerdisktypeSSD
Installeret lagerdisk grænsefladeSerial ATA III
USB-tilslutningNej
ProdukttypeSSD kabinet
Farve på produktSort
MaterialeAluminium
Dataoverførselshastighed6 Gbit/sek
Understøttede Windows-operativsystemerJa
Understøttede Linux-operativsystemerJa
Understøttede Mac-operativsystemerJa

Mål og Vægt

Bredde100 mm
Dybde70 mm
Højde7 mm
Pakke bredde120 mm
Pakke dybde100 mm
Pakke højde15 mm
Pakkevægt100 g

DIGITUS 2.5" SATA hard drive adapter M.2 or mSATA

  • 2.5" hard drive adapter with 7 mm height
  • Suitable for M.2 SSD (2230, 2242, 2260, 2280) with B-Key or B+M-Key
  • Suitable for mSATA SSD (full size)
  • Allows booting from the built-in SSD
  • SATA III interface with 6 Gbit/s
  • Read speed up to 520 MB/s
  • SATA Rev.3.2 with DEVSLP power saving function
  • Mode settings via DIP Switch
  • Closed aluminium housing
  • PCI Express M.2 Spec. Revision 0.7, Version 1.0
  • PCI Express Mini Card Electromechanical Spec. 1.2
  • Dimensions: 100 x 70 x 7 mm

Product Features

Dataoverførsel

max. overførselshastighed (Mbit/Sek.)520
Max. Data Transmission Rate (GBit/s)0,52

Connector A (host)

Connector B

Strømkilde

strømkildeSATA

Generelt

farvesort
bredde (mm)100
højde (mm)70
dybde (mm)700
vægt (g)50

Spørgsmål vedr. DIGITUS 2,5 SATA Hard Drive Adapter M.2/mSATA?

Skriv til os på kundeservice@skiftselv.dk

Bemærk! Der er først indgået en bindende aftale, når vi har bekræftet din bestilling.